outboard motor
Trend 3.0

discover now

More robust, smarter, quieter: The new Trend 3.0

The entire motor range from 2.2kW (24VDC) to 6.0kW (48VDC) is made of aluminum and guarantees maximum robustness. The integrated anti-cavitation plate prevents air suction and guarantees maximum efficiency at the propeller. The standard 5″ Smart Touchscreen Display with integrated GPS shows the user all relevant lifetime data in the desired unit. The gearless and sensorless asynchronous motor ensures reliable operation. All these things give the boater a clean and state-of-the-art boating experience.

€ 3.399

incl. VAT

Trend 3.0

Outboard Motor Trend, Tiller L

The Trend 3.0 comes with a profiled shaft design that significantly improves steering behavior. There are three shaft lengths available to suit your needs: XS, S, L. The Trend 3.0, which features a pin-style control and an L-shaft, has a shaft length of 75 cm.

€ 3.399

incl. VAT

Trend 3.0

Outboard Motor Trend, Tiller L

The Trend 3.0 comes with a profiled shaft design that significantly improves steering behavior. There are three shaft lengths available to suit your needs: XS, S, L. The Trend 3.0, which features remote control and an L-length shaft, has a shaft length of 75 cm.

The advantages of the Outboard Motor Trend 3.0

Extremely robust construction (all necessary parts of the motor are made of water-resistant aluminum)

The integrated anti-cavitation plate prevents the propeller from drawing air and guarantees maximum efficiency

All underwater parts are additionally provided with a special coating, which is usually used in pipeline construction and guarantees 100% corrosion protection

The suspension has all the necessary functions, including tilting up and down in the event of a collision with the ground

The gearless and encoderless AC synchronous motor ensures reliable operation, even if there is water in the motor housing

Quality - Made in Austria

Technical
Details

Motor

Power: 3,000W
Voltage: 48V
Comparable thrust of gasoline outboard motor: 8 HP
Thrust: 169 lbs
Weight: 24.1 kg (L)

Additional Accessories

Frequently Asked Questions

What power is required?

The Outboard Motor Trend 3.0 is suitable for dinghies and smaller boats. In order to have sufficient reserves against wind and waves, we recommend the Trend 3.0 for boats up to 3.0 tons, depending on the hull shape; the Trend 4.3 can be used up to 4.0 tons.

The driving time naturally depends on the capacity and quality of the batteries.
Below are examples with the Aquamot Longlife Deep-Cycle batteries.

Trend 3.0 with 4 Aquamot ALS batteries 12V/260AhTrend 4.3 with 4 Aquamot ALS batteries 12V/260Ah
Partial load12 h 00 min10 h 00 min
Half load06 h 30 min05 h 30 min
Full load02 h 55 min02 h 15 min

Of course, there are many ways to increase or decrease the range. In principle, however, only traction batteries should be used, which have also been designed for higher currents over a longer period (ATTENTION: no starter batteries or semi-traction batteries). In addition, a minimum capacity of at least 110Ah is recommended. All batteries should have the same capacity in order to achieve the highest possible service life. Always ask your Aquamot dealer or Aquamot about the capacity design beforehand.

In general, everything is included in the drive package except the batteries and charger. This means that the remote control also includes the control lever and on-board computer, while the tiller control is integrated into the motor unit. The cable lengths are standardized (3 m main cables, 30 cm battery bracket leads, and 6 m to the display and throttle/shift lever). A cable extension can of course be supplied.

The warranty period is 2 years.

Sign up for our newsletter
and don’t miss any
electrifying news

Aquamot Electric Motors
GmbH

Heroalstraße 5
A-4870 Vöcklamarkt
+43 7682 8535
+43 7682 8535 15
office@aquamot.com

Opening hours:
Mon-Thu: 8:00 AM – 4:30 PM
Fri: 8:00 AM – 12:00 PM

Boot Düsseldorf

23. - 31.1.2027
Düsseldorf

Austrian Boat Show

25.- 28.2.2027
Tulln